Thursday, August 2, 2012

Oliver + S Tea Party Sundress

This was the first O+S pattern I bought.  I had been eyeing the O+S patterns for almost a year, trying to decide where to start.  I liked the look of the finished product but with smaller pattern makers, sometimes you might not get the best directions, or the pattern isn't quite right, or any other number of things.  I bought this pattern and it sat on my computer for several weeks before I decided to do anything with it (it's a digital pattern).  The first time I made it I didn't realize that my printer printed the pattern at 96%, so my finished garment, though adorable, was much to small for Piper (you wouldn't think 4% would make a big difference but it did).  I put this one aside for a while and decided to come back to it for my fall project.  I know it is called a "sundress" but I made mine to be a jumper.  I can just see this with a cute top underneath and some tights or leggings.


The dress is done in a super soft denim.  I love the tulip skirt on the dress.  I think it will have lots of spin-ablitity (very important to a 2 year old).  Because of the tulip shaped skirt the pattern uses a "hem-band" to finish the skirt.  Since I was doing this in denim I opted to go my own route.  I made a denim bias strip to bind the bottom of the skirt.  I thought it gave it a finish reminiscent of a pair of blue jeans.


The pattern also suggests adding piping to the seams between the skirt pieces or the seam where the bodice meets the skirt.  The piping really does add a pop to the dress.  But, in this case because I was using the denim and going for the feel of a pair of blue jeans I top stitched either side of the seams down the front and back of the dress. (It was hard to get a good picture of the top stitching)


I also top stitched around the bodice.  Since getting that edge-stitching foot, I love to top-stitch.  I think it adds a professional look to the garment. (Again, difficult to get a good picture of)


The bodice is lined with a cute green polk-a-dot print.


You will notice that this one actually has buttons, so the hard part is going to be convincing Piper that we have to wait to wear it.

I love all the Oliver + S patterns and this one did not disappoint.  If I have one suggestion it is to take the advice and mark out the 1/2" seam allowance around top part (bib ?, shoulders?, what's that part called?) of the bodice.  It really makes a world of difference in ending up with a nice finish to this part of the dress.

I think I am a hair behind in my sewing for fall.  I have 2 dresses/jumpers, 1 jacket, 2 skirts and 1 top.  I still would like to get 2 pair of pants and at least 2 tops finished.  Good think fall doesn't usually arrive until sometime in October here.  :)





Wednesday, August 1, 2012

How To: Covered Buttons

I love the look of covered buttons.  I think they add a very finished look to a garment.  Making your own fabric covered buttons might be easier than you think.

The blanks usually come in a package like this.


Everything you need is right inside the package.  This particular kit is for a 7/8" button.  They come in a variety of sizes.  In fact my Mom recently purchased some fabric and notions for me at an estate auction.  In the box of goodies she sent me there are several sizes of blanks the largest being almost 2 inches.  I can't wait to find just the right project for a button that big.

Inside the package you have the following items; a template, a pusher, the backs (with or without a shank), the button top, and the mold for putting it all together.



Start by placing the template over your fabric.  Use the center as your guide if you desire a particular part of the fabric to be shown on the button. Trace the outside of the template. I like to trace the inside as well so it's easier to find the center when lining everything up later.



Cut out your fabric circles.



Place your fabric with the wrong side up on the mold.  Do your best to center it.  This is where tracing the center circle helps.



Place the top part of the button (shell) over the fabric.  Again, use the center circle to help you line everything up.  The more centered you have it the better for the next step.



Now do your best to tuck all that extra fabric into/over/around the button.  This is a step where an extra 3 or 4 fingers would make it easier (especially if you are trying to take pictures of it too), but alas I only have 10 fingers.



Depending on what you plan to do with the button, choose the appropriate back. Place the back of choice over the top of the gathered fabric.



Place the pusher over the top of your fabric button "sandwich".  Using all the might you have in the one finger that will fit onto the pusher, push down trying to keep the pressure as even as possible on the back of the button.  I have bent the backs before by putting to much pressure on one side or another.  Push until you hear/feel a pop-thunk sort of sound.



Pop the buttons out of the mold and there you have it.  Fabric buttons perfect for any garment (yes, I know this picture is upside-down).







Monday, July 30, 2012

Surviving Summer: Stay-cation

What a great week we had last week.  DH took the week off from work and my aunt came to visit for a few days.  So we spent the week exploring unseen areas and some familiar ones where we live.  Being a nomadic family we always like to take advantage of all the things the local area we call home for a short time may have to offer.  This stay-cation was no exception.

We went to the beach:




Hunted for sharks teeth:


Found some sharks teeth (these are just two of the many):


Went to a museum:



Blew bubbles:


Hiked in the rain.  Sadly there were no pictures of this as we were just trying to get back to our car before lightning struck.

We finished the week by dropping Zachary off at overnight camp.


The house was a little quiet today without our houseguest and Zachary away at camp.  It was a fun week, but the rest Piper and I got today was much needed!









Monday, July 23, 2012

Oliver + S 2+2 Blouse

This was my weekend project.


This was a super fast project to put together.  I cut out the pieces on Saturday morning after breakfast while the kiddos were playing with Play-Doh.  I sewed it up during nap time on Saturday.  Though it was a struggle because I really wanted a nap.  Then, I hemmed and finished when the kiddos went to bed on Saturday evening.

Per the instructions the back of the blouse is to have a button placket with 5 buttons for closure.  I opted to remove the placket and keep the back as one piece.  Have you ever tried to close 5 small buttons on a wiggly 2 year old?  


I haven't actually tried it on Piper yet.  So it may or may not fit over her head.  Since the blouse was made of a quilting cotton there isn't a whole lot of give to it.  I guess if I try it on her and discover it doesn't fit, I will be glad that It was such a quick project to put together because I'll have to make another.

I am already thinking about doing another blouse with this same pattern.  This time though, I might leave off the gathering of the front and instead do some honeycomb smocking.  I just haven't worked out the details in my head yet.  So, stay tuned.


Friday, July 20, 2012

Friday Favorites / Oliver + S Sunday Brunch Jacket

I'm a little late getting my Friday Favorite up this week, but this week's favorite is "getting a project finished that you wanted to give up on."

I think at times we all run into a project or part of a project that really trips us up.  This week for me it was this jacket.


The jacket itself wasn't difficult.  The inside of the jacket is unlined but as the pattern suggests, I tried to bind the inside seams for a nice finish.  The binding was such a pain in the neck I had to walk away from the project for a few days.  I actually avoided my work room for several days the beginning of the week because of this step of the pattern.  In the end I decided that it was the inside of the jacket, not to be seen by anyone while Piper was wearing it.  Sometimes I struggle with finishing a project that is flawed.  When I want to give up on a project, I try to remember something my Aunt Brenda told me one day when we were talking about it, no one else knows if the end product was intentional or not. I have to learn to see the finished item for the good parts, like the buttons and top stitching and not the bad part, like the binding.

I do really like the finished jacket.  I will just close my eyes when I put it on Piper and when it's buttoned I will open them so I don't have to look at the inside.  I used a wool suiting for the jacket since it's intended to be used this fall.  I'm so excited about the fabric.  The wool isn't the scratchy wool, it's the smooth wool the has a beautiful drape to it.  Traditionally this particular wool suiting retails for $19/yard.  I happen to luck in to a fabulous sale and bought it for $4/yard.  This is certainly one of those cases where I could not possibly buy this jacket in a store for the $5-$6 spent to make it.  Last year I bought a similar jacket from Gymboree for significantly more (I won't say the price just in case DH decides to read this ;) ).

The jacket has this adorable cuff at the sleeve.  I'm a big fan of cuffs as they allow for growing room.  


Sewing a cuff on a sleeve this small can be a challenge.  The easiest way to do this I find is to stitch the cuff right side in.  Like this:


You can also see that I am using my edge-stitch foot and have the needle to the right so it will do a little less than a quarter inch seam.  You have to go at it slow, as you can only sew about an inch before you need to readjust but the end results are very nice.

I also used fabric covered buttons for a nice finish.


I love fabric covered buttons.  They just give a fancier feel to a garment, I think.  Making your own covered buttons is really easy.  I'll show you how next week.

In the end, like I said earlier, I am very happy with the end result.  This was another great O+S pattern with wonderful, very detailed directions.  I do plan on using the pattern again and I will try to bind the inside seams the next time.  I have some ideas of how to make it work better.  

I can't wait for fall.  Piper's wardrobe is really coming together.  I am a bit behind schedule, next on the list is some tops.  






Sunday, July 15, 2012

Skirting the Issue

I like Sunday's.  On Sunday's after breakfast we all seem to migrate downstairs, the kids to the play-room, DH to his workbench and I to my sewing machine.  The kids will come in and out of "The Lair" (the name affectionately given to the workspace DH and I share), we will visit them in the playroom.  Sunday's are a good time to get some serious work done on things on my project list.  Today I used my Sunday morning to make some skirts for the "Skirting the Issue" campaign being sponsored by Liz and Elizabeth of Simple Simon and Co.  They are asking for hand made skirts to be donated to girls in foster care.

My original plan was to make 6 skirts, but you try explaining to a 2 year old that a little girl needs a turtle skirt or lady bug skirt more than she does.  So, I am donating 4 skirts.  I didn't use a pattern.  Making a simple skirt isn't really rocket science so I just sort of winged it.  If you need a pattern or tutorial you can find a good one here, here or here.

I enjoyed making these skirts.  I don't usually like to make a pattern more than once, let a lone 6 times.  I did a sort of assembly line and everything came together pretty quickly.  I utilized my serger a good deal.  It's wonderful for finishing seams.



I was able to create 6 skirts (3 of each design) with 3 yards of fabric and 3 yards of no-roll elastic.  For the main part of the skirt I used the width of the fabric and a length of 12 inches.  For the contrast hem, I used the width of the fabric and a length of 4 inches.  The skirts are a 2T/3T size.  I used Piper's measurements as my guide.  I wrapped each of the skirts to donate in pretty pink tissue and wrapped a pink bow around each one.  I know what the smile on Piper's face looked like when I showed the skirts to her.  I just hope that these simple skirts can bring a smile to another child's face as well.  I encourage anyone with a little sewing skill to get involved with this project.  They are hoping to have 100 skirts donated to foster care by August 10.  So, get sewing!


Friday, July 13, 2012

Friday Favorites

Today's favorite item is quite a handy little tool.  You won't know you need one until you have it and then wonder how you lived without it.  I'm talking about a hem gauge.


A hem gauge is exactly what you think it is.  It is a metal "ruler" used for measuring and ironing the hem of a garment before sewing.  It can be a challenge to get a nice even hem.  You could sew a basting stitch around the area to be hemmed then iron the fabric folding at the basting stitch.  Or, you could just use a hem gauge and eliminate the need to sew a basting stitch then pull out said basting stitch.  Because the gauge  is metal you can safely iron over it.  One word of caution, the gauge is metal so if you iron right on it be careful it will be hot (I have learned this lesson the hard way more than once, you're welcome).  


There are a variety of measurements in both inches and centimeters.  You can use a hem gauge for a straight hem.  Or...


...a curved hem.

I use mine all the time.  It is large so doing the hem on a small sleeve or pants leg can be difficult.  It's still a handy tool to have in your arsenal.